Whitfield Advantage II-T, III & Plus Control Board: 12055902

Description

Whitfield Advantage II-T, III & Plus Control Board: 12055902. This controller will work for all Whitfield Advantage versions WP3, WP4, and WP5.

Fitment Note (Advantage II-T C, III, Plus, and Quest Plus): These stoves uses an igniter with an auto-ignition system. The board used on this model is the 12055912. This board is no longer being manufactured. The controller you’re currently looking at will work for this unit, but will require you to manually light the stove.

Note: the 1/4″ spade connections on the bottom of the controller are for the TSTAT connection. If you are not using a TSTAT you need to connect these two spade together with a jumper wire or connect your wiring harness yellow wires and connect those together at the the TSTAT bridge.

Note: If your old controller had a red slide knob and black a dial on the face, you will need an adaptor cable to make this board work with your stove. The part number for the cable is 12025901 and has been an obsolete part for some time.

Replacement For Part Numbers:

• 12055902
• 12025902
• 12025912
• 12155900
• 12155900R
• 12155912
• 12025902
• 12025912
• 12155900
• 12155900R
• 12155912
• H7881

Upgrade or replace your wiring & connectors

Shop for connectors, adapters, service tools, and more.